Xcode 4

Because I’ve encountered this problem twice, I’m going to do a little write-up about it. As much for me as for the next person who encounters this problem. In a very un-Apple way, this process is very poorly documented and very un-intuitive from a user-developer standpoint. Everything that’s here, I’ve culled from Googling about aimlessly and finding on Stack Overflow. **Symptom: **You create a new app in Xcode with no changes and launch it. It launches just fine. You then go to the target summary settings and click “Enable Entitlements” and have an iCloud key/value store and or containers. Now you launch it and nothing happens. Nothing appears, but Xcode still thinks the app is running. **What’s Happening: **To understand what is happening, you have to go have a look in the Console application (note, the actual system Console.app, not the debug console in Xcode). Open that up and select “All Messages”. Look for something that looks like this: {% highlight bash %} 1/28/12 7:49:03.945 PM taskgated: killed [pid 43838] because its use of the com.apple.developer.ubiquity-container-identifiers entitlement is not allowed {% endhighlight %} What’s happening is that taskgated is killing your app because it’s not properly signed to use iCloud. And for some reason that is not entirely clear to me, the app being killed is not at all reported back to Xcode - Xcode thinks the app is running. So you just sit there waiting for something to happen with no clue that this sinister lurking background process has killed your app. How to fix it: There are two ways you can go from here to fix this. The first and easiest, if you are just turning on entitlements and aren’t intending to use iCloud, you can just remove the iCloud Key/Value Store and iCloud containers from the target summary. After doing this, it should work. But, if you are making an iCloud-enabled app, there’s a long list of things you need to do. First, understand that you need to be a paid member of Apple Developer Program. Log into ADC. Go to the Mac Dev Center, and the Developer Certificate Utility. Create an App ID by going to App IDs and clicking the Create App ID button in the upper right. Enter the name of your app and the bundle identifier. It usually looks something like “com.company.app”. Click Continue. Your app ID should be entered. Click the App ID you just entered, then click “Enable for iCloud.” Click save. Next, go to Certificates. If you haven’t created any certificates yet, click “Create Certificate” in the upper right and follow the directions. Note, you need both a development and an application certificate. Next, go to Systems. Be sure you’ve added your Mac (and, for good measure, any others you’ll use for development). Finally, go to Profiles. 1. Click Create Profile in the upper right. 2. Select "Development Provisioning Profile" 3. Give it a name. 4. Select the app you created in step 3. 5. Select the certificate you want to use. 6. Select the systems you want to use (I did all). 7. Click "Generate" It may take a few seconds, then it will give you a download. 8. Open the downloaded profile. It will open in the "profiles" preference pane (which doesn't seem to appear until you try to install a profile). Click install. Now, in Xcode: 1. Go to Window > Organizer. 2. Select "Devices" on the top, and "Provisioning Profiles" on the left. 3. At the bottom, select "Automatic Device Provisioning" at the bottom, and click "Refresh". If you've never done this before, you'll need to log in with your ADC username and password. 4. Give it a second, it should pull in your profiles. 5. Go to your project, select your app target and select "Build Settings." Scroll down to "Code Signing." You may need to go to "All" from "Basic" in the predicate selector. 6. Under Code Signing Identity, select the dev profile you just created. Note: don't use the wildcard one - it doesn't seem to work. Whew. Now, if everything went as planned (and you sacrificed a goat to Tim Cook and Tim found your sacrifice pleasing) you should be able to launch your app with no errors. But help! I got a weird failure on build! If you get a failure on build that looks like this: {% highlight bash %} Command /usr/bin/codesign failed with exit code 1 {% endhighlight %} Then it is possible that your developer certificate is set to “Always Trust” in Keychain. It needs to be set to “System defaults” for reasons that escape me entirely. Note, this may not be entirely accurate and may even be cargo-cultish. But I’ve encountered this “issue” twice now (once in December, and once now) so I decided to write down my steps so that, in a few months when this befuddles me again, I’ll know where to look for the answer.

A few months ago, I decided I wanted to try exploring the Mac App Store ecosystem as a developer. I’ve been writing little Objective-C apps for myself for awhile, and I decided I wanted to see what it was like from the other side. So I wrote this little app called Airplane Setting. It was a stupid simple little app that made it easy to turn off your radios with a single action. I wrote the app and paid my $99 admission fee. And after a month of back and fourth with Apple and a couple of rejections for what I consider to be dubious reasons as best (especially seeing as how I could point out existing apps in the store that broke the “rule” they said my app was breaking, but whatever, their store, their rules…), my little App was finally approved for sale. It did moderately well, passing 1,000 downloads with virtually no advertising from me. I had big dreams for this little app. Plugins, global hotkey support, localization, Applescript support, and more potential functionality. But all that was dashed by “Entitlements” and Apple’s requirement that all apps must be sandboxed. Look, in theory, the idea of sandboxing an app is not bad. The problem here is Apple’s all-or-nothing approach to sandboxing. The selection of entitlements are just so limited as to be nearly useless for anyone creating a unique, new or complex app - especially one that requires hardware access. Your choice is either to sandbox your app, choosing from the available selection of entitlements, or not sandbox it and not be in the Mac App Store at all starting in March. There’s no reason to only provide such a limited subset of functionality that a developer must choose from. Would it not be better to provide us a wider set of entitlements and allow us to justify our reasons for needing them when we submit our app? The reason Apple gives for requiring sandboxing is to prevent “rogue apps” from destabilizing the system. But when you consider that the App Store itself is curated, this requirement makes even less sense. If Apple is curating the store, how does a “rogue app” end up in the App Store? I’m a huge Apple fangirl. I have almost all Apple hardware in my house, from my iMac to my Macbook Pros, to my iPad and iPhone and my wife’s iPod Touch. I had AppleTVs before they were cool (and there’s one on every one of my TVs now). I love Apple. But as an developer … I [expletive] hate Apple for this “innovation” that crippled my once-promising little app. So, at this point, my options are: Leave Airplane Setting in the App Store. Doing so will mean no further updates so I’ll likely cease development. Remove Airplane Setting from the App Store and start distributing it exclusively from the website. My original intent with Airplane Setting was to explore what it was like to be an App Store developer. I guess … now I know what it’s like to be an App Store developer, and living in constant fear of Apple as a sword of damocles hanging over your head.

Every so often I get the urge to check out desktop Linux - just to see how things have progressed and whether or not it is in a usable state yet. For the last few times, the distro of choice I have tried has been Ubuntu, as that seems to be the new de facto starting point for a desktop distro. Before beginning this review, let me first say that desktop distros have come a long way over the last few years, and Ubuntu is by far the most usable of the ones I’ve seen. Ubuntu itself has come a long way and, for someone who is willing to compromise on some points, is quite usable for someone who’s willing to spend some time tweaking things. Having said that, it still has a ways to go before reaching Windows. And it’s not even in the same league as Mac OS X. First, a little about my test rig: An AMD Athlon64 3700+ with 2 gigabytes of memory, two 250gb SATA hard drives (one for Windows, one for whatever OS I’m testing at the time), and dual GeForce 7600 GS’s running three 19” Samsung LCDs. Not your standard setup, mind you, but not ultra advanced and bleeding edge, either. The installation: The installation is much the same as previous releases of Ubuntu: load up the live CD and, from within the live environment, launch the installer. The installer itself asks fewer questions that the Windows XP installer, yet seems to be able to do more. And doesn’t require endless reboots to get everything working. My installation proceeded mostly okay (being that Windows resides on sda, I installed Ubuntu in sdb), except that after I installed and rebooted … nothing. It kept booting into Windows. I reinstalled again just to be sure I didn’t blitz through the boot record screen, but sure enough, writing to the MBR on sda doesn’t work when you have two SATA drives and you’re installing Ubuntu on sdb. This has been a bug for at least the last two times I’ve tried to install Ubuntu. I can fix it with grub commands and properly write a boot record to sda, but for the purposes of testing (and because I’m lazy and wanted to play with it) I just plugged sdb directly in and removed sda. So I’m up and running. This is something that would befuddle a lot of folks, but to be fair I’ve had problems with Windows in the past, but it seems like it would be an easy fix. So I have Ubuntu installed now. Yay. Next step is to get my three LCDs working. This is where we run into what I think is the biggest hinderance to desktop Linux: X. If I plug three monitors into two video cards on a Mac, it’s going to turn on all three monitors and allow me to drag things between them all effortlessly (one big desktop). If I plug it into Windows, I’ll need to download the drivers, but after that, no problems. Not so in X, though in fairness it is likely more due to the intrangisence of Nvidia when it comes to providing open source support. First, if you want to do anthing, you have to download a “Restricted” driver. This is Ubuntu-speak for “we didn’t want to compromise our oh-so-precious ‘free’ principles in the name of usability” (in case you can’t tell, I have very little patience for zealotry). In Ubuntu 8.04, the Restricted Drivers Manager has been poorly renamed to Hardware Drivers. Doesn’t make a lot of sense, since a driver for hardware may or may not be restricted. So, I download and install the Nvidia drivers. Next, fire up the nvidia-settings utility to fix the X config. I was running this from the shell, but I later discovered that it puts a nice menu item in the Administration for you. It sees all my cards and, using this, I am able to configure everything up. You have multiple options for ways to do three monitors, but only one works: Xinerama. You could do three separate X screens, but you can’t move windows between them. You could do Twinview on one screen and a separate X screen but, again, you couldn’t move windows between a dual screen and the third monitor, the windows on the Twinview screen don’t maximize and minimize properly, and the login screen is right in the middle of the two monitors so that it’s very difficult to see what you’re tying when you login. Only Xinerama lets you move windows between the three monitors, allows them to maximize properly, and has the login on a single screen. This was about an hour of changing settings and restarting X before I got it right. The downside? It still isn’t supported in Compiz, which is a real bummer becauase compositing window managers was one of the things I was really looking forward to using. Anybody know if Compiz accepts bounties, because I really want this feature? So no Compiz. Oh well. Next, get my other hardware working. I have a Logitech MX1000 Laser (greatest mouse ever, by the way), and I like to map the buttons to do various things (most notably, I use the “cruise” buttons to go back and fourth on web pages). In order to get this to work: sudo apt-get install xserver-xorg-input-evdev cat /proc/bus/input/devices (find Logitech USB Receiver) sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf.bak sudo gedit /etc/X11/xorg.conf Changes: Section "InputDevice" Identifier "Configured Mouse" Driver "evdev" Option "CorePointer" Option "Name" "Logitech USB Receiver" #this should be the name of the device which I made bold here. EndSection sudo apt-get install xvkbd xbindkeys gedit ~/.xbindkeysrc Changes: /usr/bin/xvkbd -xsendevent -text "\[Alt_L]\[Left]" m:0x0 + b:12 /usr/bin/xvkbd -xsendevent -text "\[Alt_L]\[Right]" m:0x0 + b:11 After restarting (yes, again) I have working buttons. Yay. The volume control on my Microsoft Natural Egro 4000 works now. It seems like this required some hacking last time around. Yay. Now to install some developer tools so I can get to work. I love Synaptic; I wish Mac OS X had real package management the way Linux does - it’s one of the things Linux really has going for it, though I generally prefer Gentoo’s portage manager. So I install Eclipse. Huge package, and I was getting really crappy download speeds, so I let it run all night and went to bed. The next day found Eclipse installed and ready to go. Installed PHP, SVN, Apache. So I now have the tools to work. My conclusions: I like Linux. I really do. I want to see Linux succeed on the desktop. And Ubuntu has gone further, faster than any other Linux distro. It is now by far the most fit and ready to use of any desktop Linux distro. I have a usable system now, and, theoretically, there is nothing stopping me from using my machine for most of my daily work. Having said that, there is a lot to be said for style. First of all, it’s ugly as sin. The Gnome UI, while it is much improved, is still terrible when compared to Windows and OS X. Also, who thought that brown was a good color for a UI? Second, the names of some of the tools are un-intuitive: “Hardware Drivers,” “SCIM Input Method Detection,” “Authorizations,” and others need to have more intuitive names, and once you use any of them, the layout is not really intuitive either. The initial screen layout with a menu at the top and a taskbar at the bottom is also not really all that usable, though it can be corrected by removing the top panel. I’m using it now (typing this in Drivel) so it is usable, but it still can’t displace my Mac for ease of use.